Reducer is widely used in the mechanical industry and automotive industry, different mechanical needs of the type of reducer is different, but no matter what type of reducer, in the use of the process should pay attention to some matters, the following by small make up for you to explain.

1, do not hit the reducer: when installing couplings, belt wheels and sprockets on the output shaft of the reducer, do not directly use hammer to install.

2. Installation of air cap: in the process of using the reduction gear, a air cap must be added to the top of the reduction gear box, and the role of the air cap is to ensure that the air inside the box of the reduction gear can be discharged.

3, change the lubricating oil: to comply with the operation instructions of the reducer. If the working environment of the reducer is too harsh and the dust is too much, the lubricating oil must be checked and replaced every 12 days or so.